Beronet cards

Beronet card BN2SO

The BN2S0 BRI ISDN cards, a powerful and flexible solution for the Open Source PBX Asterisk. Together with our channel-driver "chan_mISDN", which is covered by the GPL licensing agreement, you can easily add BRI ports to your Asterisk system. Our channel-driver is based on the new ISDN stack of the new Linux Kernel: mISDN (modular ISDN).

The BN2S0 card series is available with 2 S0 ports, which can be configured individually for each port for NT (Network Termination) or for TE (Terminal Equipment) mode. In either mode the card supports Point-To-Multi-Point mode or Point-To-Point mode. You can power each port (except BN8S0) with our power supply mlodule (BN-Power) to provide current to your Terminal Equipment

Beronet card BN4SO

The BN4S0 BRI ISDN cards, a powerful and flexible solution for the Open Source PBX Asterisk. Together with our channel-driver "chan_mISDN", which is covered by the GPL licensing agreement, you can easily add BRI ports to your Asterisk system. Our channel-driver is based on the new ISDN stack of the new Linux Kernel: mISDN (modular ISDN).

The BN4S0 card series is available with 4 S0 ports, which can be configured individually for each port for NT (Network Termination) or for TE (Terminal Equipment) mode. In either mode the card supports Point-To-Multi-Point mode or Point-To-Point mode. You can power each port (except BN8S0) with our power supply mlodule (BN-Power) to provide current to your Terminal Equipment

Beronet card BN8SO

The BN8S0 BRI ISDN cards, a powerful and flexible solution for the Open Source PBX Asterisk. Together with our channel-driver "chan_mISDN", which is covered by the GPL licensing agreement, you can easily add BRI ports to your Asterisk system. Our channel-driver is based on the new ISDN stack of the new Linux Kernel: mISDN (modular ISDN).

The BN8S0 card series is available with 8 S0 ports, which can be configured individually for each port for NT (Network Termination) or for TE (Terminal Equipment) mode. In either mode the card supports Point-To-Multi-Point mode or Point-To-Point mode. You can power each port (except BN8S0) with our power supply mlodule (BN-Power) to provide current to your Terminal Equipment

Beronet card BNxGSM

BeroNet offers with the BNxGSM card series, a powerful and flexible GSM solution for the Open Source PBX Asterisk. Together with our channel driver "chan_gsm", wich is covered by the GPL, you can easily add GSM ports to your Asterisk system.

Digital audio quality with noise suppression and echocancelling is granted by the use of Siemens GSM Modules (Tri-Band 900/1800/1900 Mhz). Optional available are Siemens Modules with Tri-Band 850/1800/1900. Sending and receiving SMS is also fully supported either by the Asterisk Manger interface or the Asterisk CLI.

Beronet Bero*fos

Disasters in a communication network are often very difficult to predict and there is usually a very small advance notice when a communication line goes down.

Bero*fos provides an effective way for dealing with such unexpected events by re-routing the lines to a back-up line when undesirable changes are detected.

Therefore beroNet provides bero*fos, a solution device for Asterix Clustering and failover scenarios that requires a physical reconnection of analogue, BRI or PRI lines.