Digium Cards

Digium Wildcard AEX410

The Digium® AEX410 is a half-length PCI-Express x1 modular gateway card for connecting analog telephone stations and analog POTS lines through a PC. It supports a combination of up to four station or trunk modules for a total of 4 lines.

Digium Wildcard TDM410P

Using an industry-standard bursting, bus-mastering interface chip that is found within millions of PC systems worldwide, and Digium VoiceBus™ technology, the TDM410 eliminates the requirement for external gateways, with industry-leading performance and price. The trunk and station modules are interchangeable, allowing the creation of any combination of interfaces. The optional hardware echo cancellation module provides 1024 taps (128 milliseconds) of echo cancellation for superior voice quality on both trunk and station interfaces. Scaling of this solution is accomplished by adding additional TDM410 or other Digium analog interface cards.

Digium AEX800P (PCI-Express)

Like our PCI-based TDM800P, the AEX800 provides an industry first with 8 standard two-wire, RJ-11 interfaces on a single card bracket. This eliminates the need for multiple brackets, external dongles, or splitters. In doing so, the AEX800 reduces part complexity, cable clutter, and points of failure.

The AEX800 contains two module banks. Each bank supports up to four analog interfaces and may be filled either with one standard Digium® quad station (S400M) or line/trunk (X400M) analog module, or up to two standard Digium single analog station (S110M) or line/trunk (X100M) modules, enabling the creation of any combination of ports

Digium AEX2400P (PCI-Express)

Using an industry-standard bursting, bus-mastering PCI interface chip that is found within millions of PC systems worldwide, and Digium VoiceBus™ technology, the TDM2400P eliminates the requirement for separate channel bank and T1 interface cards, at an industry-leading price. The quad-FXO and quad-FXS modules are interchangeable, allowing the creation of any combination of interfaces. The optional hardware echo cancellation module provides 1024 taps (128 milliseconds) of echo cancellation for superior echo cancellation on both FXO and FXS interfaces. Scaling of this solution is accomplished by adding additional TDM2400P cards.

Transcoding Card TC400B

Until now, G.729 software licenses have been bound to the Equipment MAC address, that was the reason why it was not possible to swap those licenses between machines. With the new TC400B Transcoding Card, you can swap licenses between machines easily (G.729A and G.723.1 supported).

Digium Wildcard TE412P/TE407P

The TE412P/TE407P is the next generation of Digium hardware that offers an on-board echo cancellation module. It supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis.

For further information please visit the product link.

Digium Wildcard TE212P/TE207P

Double E1 / T1 card enables per card or per port selection of either T1/E1 signals

TE212P - PCI 3.3 V

TE207P - PCI 5 V

Digium Wildcard B410P BRI ISDN

Digium's Quad S/T BRI interface with Echo Cancellation. The B410P is a half-length universal PCI 2.2-compliant Basic Rate ISDN card that supports TE and NT mode over 4-wire S/T interface.

Digium Wildcard TE410P/TE405P

Quad-Span togglable E1/T1 card enables per card or per port selection of either T1 or E1

TE410P - PCI 3.3 V

TE405P - PCI 5 V

Digium Wildcard TE210P/TE205P

Double E1 / T1 card enables per card or per port selection of either T1/E1 signals

TE210P - PCI 3.3 V

TE205P - PCI 5 V

Digium Wildcard TE110P

Single-Span T1/E1 half-length (available with 2U bracket) PCI card suporting the same features as the TE410P.

Digium Wildcard TE120P

The Wildcard TE120P is a high-performance, cost effective digital telephony interface card with the power to create a seamless network, interconnecting traditional telephony systems with emerging Voice over IP technologies.

Digium Wildcard TE121/TE121B

The TE121 is a single span, selectable T1 (24-channel), E1 (32-channel), or J1 (24-channel) card. The card utilizes Digium's VoiceBus™ technology. VoiceBus technology allows the TE121 to use an industry standard bus-mastering PCI Express interface, as found in millions of PCs worldwide, to maximize system compatibility and eliminate system conflicts. Improving upon the prior TE120P which does not offer expansion capabilities, the TE121 may be combined with Digium's VPMADT032 echo cancellation module to deliver 128ms of echo cancellation across 30 channels in E1 mode or 24 channels in T1 mode. Bundled with the VPMADT032, the product SKU is TE121B.

Digium Wildcard TE122/TE122B

The TE122 is a single span, selectable T1 (24-channel), E1 (32-channel), or J1 (24-channel) card. The card utilizes Digium's VoiceBus™ technology. VoiceBus technology allows the TE122 to use an industry standard bus-mastering PCI interface, as found in millions of PCs worldwide, to maximize system compatibility and eliminate system conflicts. Improving upon the prior TE120P which does not offer expansion capabilities, the TE122 may be combined with Digium's VPMADT032 echo cancellation module to deliver 128ms of echo cancellation across 30 channels in E1 mode or 24 channels in T1 mode. Bundled with the VPMADT032, the product SKU is TE122B.

Digium Wildcard TE220/TE220B

Digium's TE220 PCI Express card provides termination of up to 60 channels of voice or data across two E1, T1, or J1 interfaces in a PCIe x1 form factor. Selectable on a per-port or per-card basis, the TE220 allows E1 and T1 circuits to be mixed with full channel synchronization. Supporting PCIe x1, the TE220 may be used in any available PCIe 1.0 compliant slot - 1x, x4, x8, and x16 without considerations for voltage selection or lane size.

The TE220 may be combined with Digium's VPMOCT064 Octasic DSP-based echo cancellation module (not shown in picture). The VPMOCT064 provides the G.168 algorithm which has been labeled a benchmark for echo cancellation and performs 128ms (1024 taps) of echo cancellation across all 60 channels in E1 mode or all 48 channels in T1/J1 modes. Bundled with the VPMOCT064, the product SKU is TE220B.

Digium Wildcard TE420/TE420B

Digium's TE420 PCI Express card provides termination of up to 120 channels of voice or data across four E1, T1, or J1 interfaces in a PCIe x1 form factor. Selectable on a per-port or per-card basis, the TE420 allows E1 and T1 circuits to be mixed with full channel synchronization. Supporting PCIe x1, the TE420 may be used in any available PCIe 1.0 compliant slot - 1x, x4, x8, and x16 without considerations for voltage selection or lane size.

The TE420 may be combined with Digium's VPMOCT128 Octasic DSP-based echo cancellation module (not shown in picture). The VPMOCT128 provides the G.168 algorithm which has been labeled a benchmark for echo cancellation and performs 128ms (1024 taps) of echo cancellation across all 128 channels in E1 mode or all 96 channels in T1/J1 modes. Bundled with the VPMOCT128, the product SKU is TE420B.

Digium Wildcard TDM2400P

Quad-Port full-length PCI card which supports standard analog or ADSI telephones and regular POTS lines.

Digium Wildcard TDM800P

Quad-Port half-length PCI card which supports standard analog or ADSI telephones and regular POTS lines.

Digium S100M

FXS Module for use with the Wildcard TDM400P and with the Wildcard TDM800P.

Digium X100M

FXS Module for use with the Wildcard TDM400P and with the Wildcard TDM800P.

Digium S400M

FXS Module for use with the Wildcard TDM800P and with the Wildcard TDM2400P.

Digium X400M

FXS Module for use with the Wildcard TDM800P and with the Wildcard TDM2400P.

Edición Asterisk Business

The long awaited release of the Business Edition of Asterisk is here. Digium begun shipping its first commercial software product last June 27th. We are excited with the warm welcome Spain has given to this Digium product.

Corporative

S101I-Iaxy

The IAXy provides a single, fully featured FXS interface with an Ethernet back-end, speaking the Asterisk-native IAX protocol, at a highly competitive price. The IAXy is aimed at Voice Over Broadband and Internet Telephone Service Providers. The IAX protocol provides complete NAT transparency, enabling full operation behind NAT and PAT firewalls. This includes the ability to robustly transfer calls between endpoints, allowing on-net calls to be moved off of a service provider's network for better quality and lower cost.